Dell EMC XtremIO (Commercial)

ZenPacks.zenoss.EMC.XtremIO

The EMC XtremIO ZenPack provides support for monitoring the Dell EMC XtremIO storage platform. Discovery and monitoring are performed over HTTP using the XtremIO XMS HTTP REST API, which provides discovery and monitoring functionality. The EMC XtremIO ZenPack supports X1 and X2 series arrays running XIOS v4.0.x and higher via the RESTful API v2.0.x and higher (via the XMS).

The features added by this ZenPack can be summarized as follows. They are each detailed further below. - Simple provisioning for XtremIO environment using the XMS' IP address, port, and credentials - Robust support for XMS HTTP API (version 2 and above) - Event management and monitoring - Optional service impact with addition of Zenoss Service Dynamics product - Optional Capacity Thresholds with addition of Zenoss Capacity ZenPack

Applications Monitored: Dell/EMC XtremIO Storage Platform

Devices Monitored: Dell/EMC XtremIO Storage Platform

Commercial

This ZenPack is developed and supported by Zenoss Inc. Commercial ZenPacks are available to Zenoss commercial customers only. Contact Zenoss to request more information regarding this or any other ZenPacks. Click here to view all available Zenoss Commercial ZenPacks.

Support

This ZenPack is included with commercial versions of Zenoss and enterprise support for this ZenPack is provided to Zenoss customers with an active subscription.

Releases

Version 1.0.1- Download

Released on 2018/10/30
Compatible with Zenoss 5.3.x - 6.2.x and Zenoss Cloud
Requires [PythonCollector ZenPack, ZenPackLib ZenPack (>=2.0.9)

Version 1.0.0- Download

Released on 2018/03/30
Compatible with Zenoss 5.0.x - 6.1.x
Requires PythonCollector ZenPack, ZenPackLib ZenPack (>=2.0.9)

Discovery

The following components will be automatically discovered through the XtremIO XMS IP address, port and credentials you provide. The properties and relationships will be continually updated on Zenoss' normal remodeling interval which defaults to every 12 hours. Some components are updated on a more frequent basis (hourly by default).

XtremIO XMS

Attributes: Name, Build Number, DB Version, XMS Version, SW Version, XMS Name
Relationships: Tags, Cluster

Cluster

Attributes: Name, NAA System ID, Software Version, Serial Number, Product Part Number, Shared Memory, Severity
Relationships: X-Brick, Fibre Channel Switch, iSCSI Portal, Data Protection Group, Consistency Group, Initiator, Initiator Group, Target, Target Group, Volume, Snapshot, Snapshot Set, Scheduler, XtremIO XMS, Tag

X-Brick

Attributes: Name, Severity
Relationships: Cluster, Battery Backup, Storage Controller, DAE, Tag

Fibre Channel Switch

Attributes: Name, FW Version, Enabled Status, Model Name, Serial Number, FRU Status, Hardware Revision, Part Number, Severity
Relationships: Cluster, Fibre Channel Port, Fibre Channel Temp Sensor, Fibre Channel Voltage Sensor, Tags, targetPorts

Fibre Channel Port

Attributes: Name, Switch Index, Result Key, Enabled Status, Result Index
Relationships: Fibre Channel Switch, Port Target

Fibre Channel Temp Sensor

Attributes: Name, Switch Index, Result Key, Result Index
Relationships: Fibre Channel Switch

Fibre Channel Voltage Sensor

Attributes: Name, Switch Index, Result Key, Result Index
Relationships: Fibre Channel Switch

Consistency Group

Attributes: Name, Severity
Relationships: Cluster, Snapshot Set, Volume, Tag

Data Protection Group

Attributes: Name, Severity
Relationships: Cluster, SSD, Storage Controller, Tag

Initiator

Attributes: Name, Severity
Relationships: Cluster, Initiator Group, Tag

Initiator Group

Attributes: Name, Severity
Relationships: Cluster, Initiator, Target Group, Volume, Tag

iSCSI Portal

Attributes: Name, Severity
Relationships: Cluster, Target, Tag

Scheduler

Attributes: Name, Enabled Status, Scheduler Type, Snapshot Type, Severity
Relationships: Cluster, Tag

Snapshot

Attributes: Name, Creation Time, Logical Block Size, NAA Name, Volume Access, Volume Size, Volume Type, Severity
Relationships: Cluster, Volume, Snapshot Set, Tag

Snapshot Set

Attributes: Name, Severity
Relationships: Cluster, Snapshot, Consistency Group, Tag

Target

Attributes: Name, Driver Version, FW Version, MTU, Port Address, Port Index, Port MAC Address, Port Speed, Port Type, Severity
Relationships: Cluster, Target Group, iSCSI Portal, Tag

Target Group

Attributes: Name, Severity
Relationships: Cluster, Target, Volume, Initiator Group, Tag

Volume

Attributes: Name, Logical Block Size, NAA Name, Volume Access, Type, Size, Severity
Relationships: Cluster, Target Group, Initiator Group, Snapshot, Consistency Group, Tag

Battery Backup

Attributes: Name, Fimware Version, Enabled, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: X-Brick, Tag

DAE

Attributes: Name, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: DAE Controller, DAE PSU, Slot, SSD, X-Brick, xtremIoTags

DAE Controller

Attributes: Name, Location, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: DAE, Tag

DAE PSU

Attributes: Name, Fimware Version, Location, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: DAE, Tag

Local Disk

Attributes: Name, Encryption Status, Local Disk Purpose, Local Disk Type, Local Disk UID, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: Storage Controller, Tag

Slot

Attributes: Name, Product Model, Slot, State, Severity
Relationships: DAE, SSD, Tag

Storage Controller

Attributes: Name, BIOS Version, FC HBA FW Version, FC HBA HW Revision, FC HBA Model, IPMI Port Speed, IPMI Address, IPMI Subnet, IPMI BMC FW Version, IPMI BMC HW Revision, IPMI BMC Model, IPMI Gateway IP, Local Disk Ctrl FW Version, Local Disk Ctrl HW Revision, Local Disk Ctrl Model, Management Gateway IP, Management Port Duplex, Management Port Speed, Node GUID, SC Manager Address, SC Manager Subnet, OS Version, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: X-Brick, Storage Controller PSU, Local Disk, XEnv, Data Protection Group, Fibre Channel Port, Tag

Storage Controller PSU

Attributes: Name, Location, Input, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: Storage Controller, Tag

SSD

Attributes: Name, Slot Number, Fimware Version, UUID, Size, Model Name, Serial Number, FRU Status, Enabled Status, Hardware Revision, Part Number, Severity
Relationships: DAE, Slot, Data Protection Group, Tag

XEnv

Attributes: Name, Severity
Relationships: Storage Controller, Tag

Tag

Attributes: Name, Caption, Object Type
Relationships: Parent Tag, XtremIO XMS, Tagged Object

Monitoring

The following metrics will be collected every 5 minutes by default. The average statistic is collected, and the graphed value is per second for anything that resembles a rate. Each metric name corresponds with the descriptions given in the XMS documentation (available from EMC), with the exception that "_" (underscore) characters is used by Zenoss where "-" (hyphen) is used by the XMS API

XtremIoXMS: Metrics: iops, ram_usage, logical_space_in_use, rd_iops, logs_size, obj_severity, vol_size, wr_latency, thin_provisioning_savings, wr_bw, ssd_space_in_use, bw, wr_iops, ram_total, overall_efficiency_ratio, avg_latency, rd_bw, ssd_size_in_kb, rd_latency, cpu

XtremIoCluster: Metrics: avg_latency_256kb, rd_iops_4kb, rd_iops_128kb, iops, rd_bw_512kb, dedup_ratio, wr_iops_512b, unaligned_wr_iops, rd_iops_32kb, rd_iops_64kb, wr_latency_512kb, wr_latency, ud_ssd_space, rd_bw_1kb, acc_num_of_small_rd, rd_iops_1mb, wr_bw_64kb, data_reduction_ratio, unaligned_wr_bw, rd_iops_2kb, wr_bw_16kb, avg_latency_1kb, acc_size_of_wr, small_wr_bw, rd_latency_512b, wr_iops_16kb, logical_space_in_use, rd_bw_128kb, wr_latency_1kb, acc_num_of_unaligned_wr, wr_bw_32kb, rd_latency_256kb, rd_iops_gt1mb, avg_latency_512b, vol_size, wr_latency_8kb, wr_bw_1kb, thin_provisioning_savings, rd_latency_1kb, wr_latency_512b, rd_iops_512kb, ssd_size_in_kb, small_wr_iops, rd_bw_256kb, avg_latency_4kb, wr_iops_256kb, thin_provisioning_ratio, wr_iops, wr_bw_512b, acc_size_of_rd, wr_iops_gt1mb, rd_latency, rd_iops_16kb, avg_latency_2kb, rd_latency_128kb, avg_latency_8kb, rd_latency_512kb, rd_bw_1mb, avg_latency_1mb, rd_iops_256kb, rd_bw_gt1mb, rd_iops_1kb, ssd_space_in_use, bw, small_iops, acc_num_of_rd, rd_bw_4kb, wr_iops_2kb, wr_latency_1mb, rd_bw_2kb, wr_iops_4kb, avg_latency_gt1mb, wr_bw_1mb, small_rd_bw, wr_latency_4kb, unaligned_rd_bw, wr_latency_2kb, acc_num_of_unaligned_rd, acc_num_of_wr, avg_latency, wr_bw_gt1mb, ud_ssd_space_in_use, rd_latency_16kb, avg_latency_16kb, rd_latency_8kb, unaligned_rd_iops, rd_iops_512b, wr_latency_32kb, wr_bw_256kb, avg_latency_64kb, wr_iops_1kb, wr_iops_64kb, rd_bw_8kb, wr_iops_8kb, unaligned_iops, rd_bw, avg_latency_32kb, total_memory_in_use_in_percent, wr_latency_64kb, wr_latency_16kb, wr_iops_32kb, free_ud_ssd_space_in_percent, small_bw, compression_factor, acc_num_of_small_wr, wr_bw, rd_latency_2kb, wr_latency_256kb, rd_latency_64kb, obj_severity, total_memory_in_use, wr_bw_512kb, rd_latency_gt1mb, rd_bw_32kb, wr_bw_4kb, avg_latency_128kb, small_rd_iops, useful_ssd_space_per_ssd, wr_iops_512kb, rd_bw_64kb, space_saving_ratio, rd_bw_16kb, wr_iops_128kb, wr_bw_2kb, wr_bw_8kb, rd_bw_512b, unaligned_bw, rd_latency_4kb, rd_iops_8kb, avg_latency_512kb, wr_latency_128kb, rd_iops, wr_bw_128kb, rd_latency_32kb, wr_iops_1mb, dedup_space_in_use, space_in_use, rd_latency_1mb, wr_latency_gt1mb

XtremIoFibreChannelSwitch: Metrics: fan_1_rpm, fan_4_rpm, obj_severity, fan_3_rpm, enabled_state, fru_lifecycle_state, fan_2_rpm

XtremIoDataProtectionGroup: Metrics: ud_ssd_space_in_use, rd_iops, iops, ssd_size, obj_severity, useful_ssd_space, bw, wr_iops, wr_bw, ud_ssd_space, rd_bw

XtremIoInitiator: Metrics: acc_num_of_unaligned_rd, wr_iops, acc_num_of_wr, iops, acc_size_of_rd, avg_latency, rd_latency, unaligned_wr_iops, small_rd_iops, unaligned_rd_iops, wr_latency, acc_num_of_small_rd, unaligned_wr_bw, acc_size_of_wr, small_wr_bw, bw, small_iops, acc_num_of_rd, rd_bw, unaligned_bw, acc_num_of_unaligned_wr, obj_severity, rd_iops, small_rd_bw, small_bw, unaligned_iops, acc_num_of_small_wr, wr_bw, unaligned_rd_bw, small_wr_iops

XtremIoInitiatorGroup: Metrics: acc_num_of_unaligned_rd, wr_iops, acc_num_of_wr, iops, acc_size_of_rd, unaligned_wr_iops, small_rd_iops, unaligned_rd_iops, acc_num_of_small_rd, unaligned_wr_bw, acc_size_of_wr, small_wr_bw, bw, small_iops, acc_num_of_rd, rd_bw, unaligned_bw, acc_num_of_unaligned_wr, obj_severity, rd_iops, small_rd_bw, small_bw, unaligned_iops, acc_num_of_small_wr, wr_bw, unaligned_rd_bw, small_wr_iops

XtremIoSnapshot: Metrics: acc_num_of_unaligned_rd, wr_iops, acc_num_of_wr, iops, acc_size_of_rd, avg_latency, rd_latency, unaligned_wr_iops, obj_severity, small_rd_iops, unaligned_io_ratio, unaligned_rd_iops, wr_latency, acc_num_of_small_rd, wr_bw, unaligned_wr_bw, acc_size_of_wr, small_wr_bw, bw, small_iops, acc_num_of_rd, rd_bw, unaligned_bw, acc_num_of_unaligned_wr, logical_space_in_use, rd_iops, vol_size, small_rd_bw, small_bw, unaligned_iops, acc_num_of_small_wr, small_io_ratio, unaligned_rd_bw, small_wr_iops

XtremIoTarget: Metrics: acc_num_of_unaligned_rd, eth_pkt_tx, wr_iops, acc_num_of_wr, fc_dumped_frames, iops, acc_size_of_rd, fc_loss_of_signal_count, avg_latency, rd_latency, unaligned_wr_iops, fc_seq_retx_req_count, small_rd_iops, fc_prim_seq_prot_err_count, eth_pkt_tx_error, unaligned_rd_iops, wr_latency, acc_num_of_small_rd, unaligned_wr_bw, fc_link_failure_count, acc_size_of_wr, small_wr_bw, fc_loss_of_sync_count, bw, small_iops, acc_num_of_rd, rd_bw, eth_kbytes_tx, unaligned_bw, eth_kbytes_rx, eth_pkt_rx_crc_error, acc_num_of_unaligned_wr, obj_severity, rd_iops, eth_pkt_rx_no_buffer_error, small_rd_bw, small_bw, fc_invalid_crc_count, unaligned_iops, acc_num_of_small_wr, wr_bw, eth_pkt_rx, unaligned_rd_bw, small_wr_iops

XtremIoTargetGroup: Metrics: obj_severity

XtremIoVolume: Metrics: acc_num_of_unaligned_rd, wr_iops, acc_num_of_wr, iops, acc_size_of_rd, avg_latency, rd_latency, unaligned_wr_iops, obj_severity, small_rd_iops, unaligned_rd_iops, wr_latency, acc_num_of_small_rd, unaligned_wr_bw, acc_size_of_wr, small_wr_bw, bw, small_iops, acc_num_of_rd, rd_bw, unaligned_bw, acc_num_of_unaligned_wr, logical_space_in_use, rd_iops, vol_size, small_rd_bw, small_bw, unaligned_iops, acc_num_of_small_wr, wr_bw, unaligned_rd_bw, small_wr_iops

XtremIoBatteryBackup: Metrics: input_frequency, ups_load_in_percent, battery_runtime, power, avg_daily_temp, battery_voltage, obj_severity, enabled_state, real_power, output_frequency, output_voltage, output_current, ups_battery_charge_in_percent, fru_lifecycle_state, ups_voltage

XtremIoDAEController: Metrics: sas2_last_24h_number_of_phy_problems, enabled_state, sas1_last_24h_number_of_phy_problems, fru_lifecycle_state, obj_severity

XtremIoLocalDisk: Metrics: enabled_state, num_bad_sectors, fru_lifecycle_state, obj_severity

XtremIoStorageController: Metrics: sas1_last_24h_number_of_phy_problems, ib1_last_24h_number_of_port_problems, obj_severity, ib2_local_link_integrity_errors, ib1_excessive_buffer_overrun_errors, ib2_port_rcv_remote_physical_errors, enabled_state, ib1_last_24h_number_of_port_faults, ib2_excessive_buffer_overrun_errors, ib1_port_rcv_errors, ib2_symbol_errors, ib1_port_rcv_remote_physical_errors, ib2_link_error_recoveries, sas2_last_24h_number_of_phy_problems, ib2_last_24h_number_of_port_problems, ib2_link_downed, ib2_port_rcv_errors, ib1_local_link_integrity_errors, ib1_link_error_recoveries, ib1_symbol_errors, ib2_last_24h_number_of_port_faults, dimm_correctable_errors, ib1_link_downed, fru_lifecycle_state

XtremIoSSD: Metrics: obj_severity, rd_iops, percent_endurance_remaining, wr_iops, wr_bw, ssd_space_in_use, iops, bw, enabled_state, rd_bw, ssd_size_in_kb, num_bad_sectors, fru_lifecycle_state

XtremIoXenv: Metrics: cpu_usage, obj_severity

XtremIoStorageControllerPSU: Metrics: enabled_state, fru_lifecycle_state, obj_severity

XtremIoDAEPSU: Metrics: enabled_state, fru_lifecycle_state, obj_severity

XtremIoDAE: Metrics: ssd_space_in_use, ssd_size_in_kb, fru_lifecycle_state, obj_severity

XtremIoScheduler: Metrics: enabled_state

XtremIoConsistencyGroup: Metrics: obj_severity

XtremIoConsistencyGroupVolume: Metrics: obj_severity

XtremIoBrick: Metrics: ssd_space_in_use, ssd_size_in_kb, obj_severity

XtremIoSwitchTempSensor: Metrics: temperature

XtremIoSwitchVoltSensor: Metrics: volts

XtremIoSwitchPort: Metrics: status

Event Management

A monitoring plugin collects events detected by the XMS and mirrors events displayed in the XMS administration interface.

Service Impact

When combined with the Zenoss Service Dynamics product, this ZenPack adds built-in service impact and root cause analysis capabilities for services running on EMC XtremIO. The service impact relationships shown in the diagram and described below are automatically added. These will be included in any services that contain one or more of the explicitly mentioned components.

Service Impact Relationships

XtremIoXMS impacted by related XtremIoCluster
XtremIoCluster impacted by related XtremIoBrick, XtremIoFibreChannelSwitch, XtremIoConsistencyGroup, XtremIoISCSIPortal, XtremIoDataProtectionGroup, XtremIoInitiator, XtremIoInitiatorGroup, XtremIoTarget, XtremIoTargetGroup, XtremIoSnapshot, XtremIoSnapshotSet, XtremIoScheduler, XtremIoVolume
XtremIoBrick impacted by related XtremIoBatteryBackup, XtremIoStorageController, XtremIoDAE
XtremIoDAE impacted by related XtremIoSSD, XtremIoSlot, XtremIoDAEController, XtremIoDAEPSU
XtremIoStorageController impacted by related XtremIoStorageControllerPSU, XtremIoLocalDisk, XtremIoXenv, XtremIoSwitchPort
XtremIoFibreChannelSwitch impacted by related XtremIoSwitchPort, XtremIoSwitchTempSensor, XtremIoSwitchVoltSensor
XtremIoInitiatorGroup impacted by related XtremIoInitiator, XtremIoVolume
XtremIoTargetGroup impacted by related XtremIoTarget, XtremIoVolume
XtremIoSSD impacted by related XtremIoSlot
XtremIoDataProtectionGroup impacted by related XtremIoSSD, XtremIoStorageController
XtremIoTarget impacted by related XtremIoISCSIPortal
XtremIoConsistencyGroup impacted by related XtremIoVolume
XtremIoSnapshotSet impacted by related XtremIoSnapshot

Note: Relations to external systems like Linux, Windows, and vSphere require updated versions of the related ZenPacks.

Capacity ZenPack Thresholds

This ZenPack contains several thresholds that can be used with the Capacity ZenPack. Install order doesn't matter, but the Capacity thresholds will not be loaded unless the Capacity ZenPack is installed before or after the XtremIO ZenPack.

Usage

Adding XtremIO Devices

Use the following steps to start monitoring an XtremIO environment using the Zenoss web interface.

Navigate to Infrastructure tab in the Zenoss web interface
Select the /Devices/Storage/EMC/XtremIO device class
Optionally Select the "Details" link, followed by "Configuration Properties". Type "XtremIo" into the "Name" column filter and edit the relevant zProperties
Select the "Add Single Device" or "Add Multiple Devices" option from the Add Device drop-down menu
Provision the "Name or IP" field with the XMS IP Address
Click Add.
A device representing the XMS will be added to the /Devices/Storage/EMC/XtremIO device class
After modeling, the title of the XMS will reflect the configured XMS name.
If device is not automatically modeled, check that the values of zProperties beginning with "zXtremIo..." are appropriate

Command Line Tools

Several scripts are included for use with troubleshooting or sample data collection. These scripts reside in the $ZENPACK/ZenPacks/zenoss/EMC/XtremIO/utilities directory and calling --help will display usage information for each.

get-object.py - (Performs a single query against the remote API endpoint)
list-objects.py - (Performs a walk (multiple "list" queries) against the remote API endpoint)

Installed Items

Installing this ZenPack will add the following items to your Zenoss system.

Device Classes

/Storage/EMC/XtremIO

Configuration Properties

zEMCXtremIoUser
zEMCXtremIoPassword
zEMCXtremIoUseSSL
zEMCXtremIoHttpPort
zEMCXtremIoHttpTimeout
zEMCXtremIoPoolSize
zEMCXtremIoApiVersion
zEMCXtremIoCollectionInterval

Modeler Plugins

EMC.XtremIO.http.XMSMap

Datasource Types

XtremIO Datasource (HTTP)
XtremIO Events Datasource (HTTP)
XtremIO Modeler Datasource (HTTP)

Monitoring Templates

XtremIoXMS
XtremIoCluster
XtremIoFibreChannelSwitch
XtremIoDataProtectionGroup
XtremIoInitiator
XtremIoInitiatorGroup
XtremIoSnapshot
XtremIoTarget
XtremIoTargetGroup
XtremIoVolume
XtremIoBatteryBackup
XtremIoDAEController
XtremIoLocalDisk
XtremIoStorageController
XtremIoSSD
XtremIoXenv
XtremIoTag
XtremIoStorageControllerPSU
XtremIoSlot
XtremIoDAEPSU
XtremIoDAE
XtremIoSnapshotSet
XtremIoISCSIPortal
XtremIoScheduler
XtremIoConsistencyGroup
XtremIoConsistencyGroupVolume
XtremIoBrick
XtremIoSwitchTempSensor
XtremIoSwitchVoltSensor
XtremIoSwitchPort

Device Types

XMSDevice (in /Storage/EMC/XtremIO)

Component Types

Cluster
X-Brick
Fibre Channel Switch
Fibre Channel Port
Fibre Channel Temp Sensor
Fibre Channel Voltage Sensor
Consistency Group
Data Protection Group
Initiator
Initiator Group
iSCSI Portal
Scheduler
Snapshot
Snapshot Set
Target
Target Group
Volume
Battery Backup
DAE
DAE Controller
DAE PSU
Local Disk
Slot
Storage Controller
Storage Controller PSU
SSD
XEnv
Tag

Event Classes

/XtremIO/Status
/XtremIO/Perf

Required Daemons

Type	Name
Modeler	zenmodeler
Performance Collector	zenpython

Upgrade

The EMC XtremIO Zenpack can be upgraded. To upgrade the ZenPack, install the latest version over the existing one. There is no action for the user to migrate the data. The performance data and events of old ZenPack are retained as per the retain policy settings.

Limitations

Known Issues

Known Issue when importing xtremio-bundle.zip into Analytics

Due to the large amount of data available for export, the Analytics server database (MySQL) may require a configuration change prior to importing the xtremio-bundle.zip file. To prevent this issue, execute the following commands on the analytics server:

echo "max_allowed_packet=100M" >> /etc/my.cnf
/etc/init.d/mysql restart

Symptoms of this issue include a GUI flare message containing:

"Import failed. Reason: Could not roll back Hibernate transaction; nested exception is org.hibernate.TransactionException: JDBC rollback failed"

Changes

1.0.1

Maintenance release.
Updated icons for better theme compatibility
Revised Alert monitoring to mirror XMS UI Alerts (ZPS-4430)
Allow custom device title (ZPS-3807)
Compatible with Zenoss 5.3.3 - 6.2 and Zenoss Cloud: Incompatible with Zenoss Resource Manager 4.x

1.0.0

Initial release.
Tested with Zenoss Resource Manager 5.2.5, Zenoss Resource Manager 5.3.3, Zenoss Resource Manager 6.1.2, Service Impact Service Impact 5.2.3 and Analytics 5.1.0